Superior
Quality
The GPC proximal hip nail instrument set contains various instruments that are used for insertion of the GPC proximal hip nail in the femur.
| GNIS1443 | Instrument Set for intraHEAL Proximal Hip Stabilizing Nail | |
| GNIS1443.01 | Handle | 1 |
| GNIS1443.02 | Proximal Guide Rod 130° | 1 |
| GNIS1443.03 | Distal Guide Rod - 180 / 200 / 220 mm | 1 |
| GNIS1443.04 | Guide Rod Wheel | 2 |
| GNIS1443.05 | Guide Wire Holder | 1 |
| GNIS1443.06 | Distal Locking Protection Sleeve , Drill Sleeve & Trocar | 1 |
| GNIS1443.07 | Distal Locking Protection Sleeve & Drill Sleeve | 1 |
| GNIS1443.08 | Reduction Rod / Medullary Tube | 1 |
| GNIS1443.09 | Drill Bit, 5.0 mm x 300 mm | 2 |
| GNIS1443.10 | Drill Bit, 5.0 mm with Limitation | 1 |
| GNIS1443.11 | Wrench for Limitation (Allen Key) | 1 |
| GNIS1443.12 | Depth Gauge | 1 |
| GNIS1443.13 | Distal Locking Screw Driver 5.0 mm | 1 |
| GNIS1443.14 | Set Screw Driver | 1 |
| GNIS1443.15 | End Cap Screw Driver 3.5 mm | 1 |
| GNIS1443.16 | Sliding Hammer | 1 |
| GNIS1443.17 | T-shaped Connect Wrench (ball Tip) | 1 |
| GNIS1443.17a | Small T Shaped connect wrench | 1 |
| GNIS1443.18 | Nail Extraction Rod | 1 |
| GNIS1443.19 | Ruler | 1 |
| GNIS1443.20 | Protect Sleeve | 1 |
| GNIS1443.21 | Guide Pin Sleeve 3.0 mm | 1 |
| GNIS1443.22 | Proximal Cortical Reamer | 1 |
| GNIS1443.23 | Proximal Cannulated Drill Bit | 1 |
| GNIS1443.24 | Proximal Cannulated Drill Bit With Limitation | 1 |
| GNIS1443.25 | Quick Coupling Connector | 1 |
| GNIS1443.26 | Guide Wire Olive | 1 |
| GNIS1443.26a | Guide Wire Plain | |
| GNIS1443.27 | Flexible Reamer with Fixed Head (9 mm - 13 mm) | 5 |
| GNIS1443.28 | Soft-Tissue Protecting Pad | 1 |
| GNIS1443.29 | Reamer Presser | 1 |
| GNIS1443.30 | Main Nail Connector | 1 |
| GNIS1443.31 | Main Nail Connect Impactor | 1 |
| GNIS1443.32 | Cannulated Bone Awl | 1 |
| GNIS1443.33 | Insertion Bolt | 2 |
| GNIS1443.34 | Open Spanner | 1 |
| GNIS1443.35 | Hammer | 1 |
| GNIS1443.36 | Proximal Nail Sleeve | 1 |
| GNIS1443.37 | Compression Nut | 1 |
| GNIS1443.38 | Cephalic Nail Sleeve | 1 |
| GNIS1443.39 | Cephalic Nail Trocar | 1 |
| GNIS1443.40 | Guide Wire for Cephalic Screw | 3 |
| GNIS1443.41 | Depth Gauge For Cephalic Screw | 1 |
| GNIS1443.42 | Locking Screwdriver For Cephalic Screw T-Type | 1 |
| GNIS1443.43 | Locking Rod (Left / Right) | 1 |
| GNIS1443.44 | Locking wheel 1 | 1 |
| GNIS1443.45 | Locking wheel 2 | 1 |
| GNIS1443.46 | Locking wheel 3 | 1 |
| GNIS1443.47 | Distal Locking Jig for Long Nail | 1 |
| GNIS1443.48 | Flat Drill Bit | 1 |
| GNIS1443.49 | AP Stablizier | 1 |
| GNIS1443.50 | Positioning Block | 1 |
| GNIS1443.51 | Protection Sleeve with Trocar for AP Stablizer | 1 |
| GNIS1443.52 | Drill sleeve with Drill bit for AP stablizer | 1 |
| GNIS1443.53 | AP Stablizier with T-Type | 1 |
| GNIS1443.54 | Aluminium Graphic Case | 1 |
