Superior
Quality
fixLOCK Instrument Set for Large Fragment with Aluminium Graphic Box
| GOS1439L | fixLOCK Instrument Set for Large Fragment with Aluminium Graphic Box | Qty. |
| S-BTD1130.32.175 | Twist Drill (Drill Bit) Q.C. - Superior, Dia. 3.2 mm, 175 mm Length | 1 |
| S-BTD1130.32.195 | Twist Drill (Drill Bit) Q.C. - Superior, Dia. 3.2 mm, 195 mm length | 1 |
| S-BTD1130.45.175 | Twist Drill (Drill Bit) Q.C. - Superior, Dia. 4.5 mm, 175 mm length | 1 |
| S-BTD1130.45.195 | Twist Drill (Drill Bit) Q.C. - Superior, Dia. 4.5 mm, 195 mm length | 1 |
| S-ILBS736.43 | Drill Bit for Locking 4.3 mmx230mm - Superior Type | 1 |
| S-IBS700.04 | Counter Sink - Superior, 4.5 mm | 1 |
| S-ILBS762.65 | AO Bone Tap - Superior, Cancellous 6.5 x 200 mm & 4.5 mm Cortical (1 pc each) | 2 |
| S-IBS720.32 | Drill Sleeve Insert Superior 2.5 x 120 mm | 1 |
| S-ILBS737.45 | Combined Drill Guide 3.2/4.5 mm | 1 |
| S-ILBS737.65 | Combined Drill Guide 3.2/6.5 mm | 1 |
| S-ILBS747.35 | Screw Driver Hexagonal Blue Silicon Handle - 3.5 mm (for 4.5/6.5 mm Screw) | 1 |
| ILBS746.35 | Screw Driver Shaft Q.C 3.5 mm(for 4.5/6.5 mm Screw) | 1 |
| S-IBS753 | Screw Holding Forceps | 1 |
| S-IBS708 | Depth Gauge (A.O. Type)-Large 90 mm | 1 |
| S-ILBS716.50 | 5.0 Locking Drill Sleeve 4.3 x 80 mm | 2 |
| S-ILBS716.65 | 6.5 Locking Drill Sleeve 4.5 x 80 mm | 2 |
| S-REH1064.18.235L | Hohmann Retractor- Superior, 18 mm Wide, Long Narrow Tip, Length 235 mm | 1 |
| S-REH1064.22.250 | Hohmann Retractor- Superior, 22 mm Wide, With Wide Tip, Length 250 mm | 1 |
| S-REH1068.12C | Periosteal Elevator with Silicon Handle - Curved - Superior, 12 mm | 1 |
| S-IBS765 | Quick Coupling Handle for Tap - Superior | 1 |
| S-BHF1248.24 | Reduction Forceps (Thread Lock ), Serrated - Superior, 225 mm | 2 |
| S-ILBS739-L | Threaded Plate Holder Large | 2 |
| S-IBP630 | Plate Bender Large by pair | 1 |
| S-BHF1246.26 | Self-Centring Bone Holding Forceps Large 260 mm | 2 |
| S-SH35 | Screwholder Screwdriver SW3.5 x 225 mm Cut on Tip | 1 |
| S-TH786.40 | Torque Handle 4.0N.M | 1 |
| S-IBS735.45NE | Dual Use Drill Guide 3.2 mm(Neutral Eccentric) | 1 |
| 1439L.AK | Allen Key | |
| S-AGC1439L | Graphic Container | 1 |
| screw rack | ||
| fixLOCK screw 5.0, - 20mm-60mm (2mm increments) 65mm-90mm (5mm increments) - 5 pcs each size | ||
| self taping cortex screw 4.5mm - 20mm-66mm (2mm increments) - 3 pcs each | ||
| Cancellous screw 6.5mm, fully threded 25mm-100mm (5mm increments) - 3 pcs each size | ||
| fixLOCK Cancellous screw 6.5mm, fully threded 25mm-85mm (5mm increments) -4 pcs each size, 90mm-120mm (5mm increments) - 2 pcs each size |
