Superior
Quality
fixLOCK Instrument Set for Small Fragment with Aluminium Graphic Box
| GOS1439S | fixLOCK Instrument Set for Small Fragment with Aluminium Graphic Box | QTY. |
| S-BTD1130.25.180 | Twist Drill (Drill Bit) Q.C. - Superior, Dia. 2.5 mm, 180 mm Length | 1 |
| S-BTD1130.27.150 | Twist Drill (Drill Bit) Q.C. - Superior, Dia. 2.7 mm, 150 mm Length | 1 |
| S-BTD1130.35.200 | Twist Drill (Drill Bit) Q.C. - Superior, Dia. 3.5 mm, 200 mm Length | 1 |
| S-ILBS736.20 | Drill Bit for Locking 2.0 x150 mm - Superior Type | 2 |
| S-ILBS736.28 | Drill Bit for Locking 2.8 mm - Superior Type | 2 |
| S-IBS700.03 | Counter Sink - Superior, 3.5 mm | 1 |
| S-IBS762.35 | Bone Tap Quick Coupling - Superior, 3.5 mm Cortical | 1 |
| S-IBS762.40 | Bone Tap Quick Coupling - Superior, 4.0 mm Cancellous | 1 |
| S-IBS765 | Quick Coupling Handle for Tap - Superior | 1 |
| S-IBS723.20 | Triple Drill Guide - Superior, 2 mm | 1 |
| S-IBS720.15 | Drill Sleeve Insert- Superior, 1.5 mm | 1 |
| S-ILBS716.35 | Drill Sleeve for Locking Screw 3.5 mm- 2.8 x 80mm Superior | 2 |
| S-ILBS716.27 | Drill Sleeve for Locking Screw 2.7 mm - 2.0 x 80mm Superior | 2 |
| S-ILBS747.25 | Screw Driver Hexagonal Blue Silicon Handle - Superior, 2.5 mm (for 2.7/3.5 mm Screw) | 1 |
| ILBS746.25 | Screw Driver ShaftQ.C 2.5 mm(for 3.5 mm Screw) | 1 |
| S-IBS709 | Depth Gauge (A.O. Type)-Small 80 mm | 1 |
| S-REH1053 | Sharp Hook | 1 |
| S-IBS753 | Screw Holding Forceps | 1 |
| S-ILBS737.20 | Combined Drill Guide 2.0/2.7 mm | 1 |
| S-ILBS737.25 | Combined Drill Guide 2.5/3.5 mm | 1 |
| S-REH1064.08.160 | Hohmann Retractor 8 mm Wide, Short Narrow Point, Length 160 mm | 1 |
| S-REH1064.15.160 | Hohmann Retractor 15 mm Wide, Length 160 mm | 1 |
| S-REH1068.08C | Periosteal Elevator with Silicon Handle curved8 x 190 mm | 1 |
| S-BHF1247.14 | Pointed Reduction Forceps 155 mm | 2 |
| S-BHF1246.19 | Self-Centring Bone Holding Forceps 190 mm | 2 |
| S-ILBS738 | Push Pull Reduction Device | 1 |
| S-IBP630.01 | Plate Bender Small by pair | 1 |
| S-ILBS739-S | Threaded Plate Holder | 2 |
| S-SH25 | Screwholder Screwdriver SW2.5 Cut on Tip | 1 |
| S-TH786.15 | Torque Handle 1.5N.M | 1 |
| S-ILBS736.18 | Drill Bit for Locking1.8 x 165 mm - Superior Type | 1 |
| S-IBS760.24 | Bone Taps T-Handle - Superior, 2.4 mm Cortical | 1 |
| S-ILBS716.24 | Drill Sleeve for Locking Screw 2.4 mm - 1.8mm Superior | 2 |
| S-ILBS790 | QC Screwdriver shaft | 1 |
| S-ILBS737.18 | Combined Drill Guide 1.8/2.4 mm | 1 |
| S-REH1064.06.160 | Hohmann Retractor- Superior, 6 mm Wide, Short Narrow Point, Length 160 mm | 1 |
| S-IBS707.50 | Mini Depth Gauge 50 mm | 1 |
| S-IBS735.35NE | Dual Use Drill Guide 2.5 mm(Neutral Eccentric) | 1 |
| S-AGC1439S | Graphic Container | 1 |
| Screw rack | ||
| fixLOCK screw 3.5,, - 10mm-30mm (2mm increments) 35mm-80mm (5mm increments) - 5 pcs each size | ||
| cortex screw 3.5mm 10mm-50mm (2mm increments) - 3 pcs each size | ||
| fixLOCK screw 2.7mm 10mm-60mm (2mm increments) - 4 pcs each | ||
| Cancellous screw 4mm, partially threded 12mm-40mm(2mm increments) 45mm-60mm (5mm increments) - 2 pcs each size | ||
| Cancellous screw 4mm, fullythreded 12mm-40mm(2mm increments) 45mm-60mm (5mm increments) - 2 pcs each size |
